.BuildSysPro.IBPSA.Fluid.HeatExchangers.Validation

Information

This package contains models that validate the heat exchanger models. The examples plot various outputs, which have been verified against analytical solutions. These model outputs are stored as reference data to allow continuous validation whenever models in the library change.

Contents

Name	Description
ConstantEffectiveness	Model that demonstrates use of a heat exchanger with constant effectiveness
DryCoilEffectivenessNTU	Model that demonstrates use of a heat exchanger without condensation that uses the epsilon-NTU relation
EvaporatorCondenser	Test model for the evaporator or condenser model
HeaterCooler_u	Model that demonstrates the ideal heater model
PrescribedOutlet	Model that demonstrates the ideal heater/cooler model for a prescribed outlet temperature, configured as steady-state
PrescribedOutlet_dynamic	Model that demonstrates the ideal heater/cooler model for a prescribed outlet temperature, configured as dynamic
WetCoilEffectivenessNTU	Model that validates the wet coil effectiveness-NTU model