.BuildSysPro.IBPSA.Fluid.Interfaces.Examples.ReverseFlowHumidifier

Model that tests the reverse flow for a humidifier

Information

This model tests whether the results for a humidifer are identical for forward flow and reverse flow.

Name	Description
Medium

September 20, 2020, by Michael Wetter:
Updated model to use one port temperature sensor from Modelica Standard Library.
This is for #1399.
May 2, 2019, by Jianjun Hu:
Replaced fluid source. This is for #1072.
April 12, 2017, by Michael Wetter:
Removed temperature connection that is no longer needed.
This is for issue Buildings #704.
November 2, 2016, by Michael Wetter:
Changed assertions to blocks that compute the difference, and added the difference to the regression results.
This is for issue 564.
October 9, 2013, by Michael Wetter:
Replaced Modelica.Fluid.Sources.FixedBoundary with IBPSA.Fluid.Sources.FixedBoundary as otherwise, the pedantic model check fails in Dymola 2014 FD01 beta3.
July 5, 2013, by Michael Wetter:
Changed one instance of Modelica.Fluid.Sources.MassFlowSource_T, that was connected to the two fluid streams, to two instances, each having half the mass flow rate. This is required for the model to work with Modelica 3.2.1 due to the change introduced in ticket #739.
August 19, 2010, by Michael Wetter:
First implementation based on a model from Giuliano Fontanella.

Generated at 2026-05-28T20:36:11Z by OpenModelicaOpenModelica 1.26.7 using GenerateDoc.mos