.BuildSysPro.IBPSA.Fluid.MixingVolumes.Validation

Information

This package contains validation models for the classes in IBPSA.Fluid.MixingVolumes.

Note that most validation models contain simple input data which may not be realistic, but for which the correct output can be obtained through an analytic solution. The examples plot various outputs, which have been verified against these solutions. These model outputs are stored as reference data and used for continuous validation whenever models in the library change.

Contents

Name	Description
CoupledVolumesAir	Validation model for two coupled volumes with air
CoupledVolumesGlycol47	Validation model for two coupled volumes with glycol
CoupledVolumesSpecializedAirPerfectGas	Validation model for two coupled volumes with air as a perfect gas
CoupledVolumesSpecializedWaterConstantProperties_pT	Validation model for two coupled volumes with water with constant properties
CoupledVolumesSpecializedWaterTemperatureDependentDensity	Validation model for two coupled volumes with water with temperature dependent density
CoupledVolumesWater	Validation model for two coupled volumes with water
MSLCombustionAir	Test model with medium for combustion air from the Modelica Standard Library
MSLFlueGasSixComponents	Test model with medium for flue gas from the Modelica Standard Library
MixingVolume	Test model for mixing volumes
MixingVolumeAdiabaticCooling	Validation model for mixing volume with adiabatic cooling
MixingVolumeHeatReverseFlow	Validation model for mixing volume with heat input and flow reversal
MixingVolumeHeatReverseFlowPrescribedHeatFlowRate	Validation model for mixing volume with heat input and flow reversal and prescribed heat flow rate
MixingVolumeInitialization	Test model for mixing volume initialization
MixingVolumeMFactor	A check for verifying the implementation of the parameter mSenFac
MixingVolumeMassFlow	Test model for mass flow into and out of volume
MixingVolumeMoistureReverseFlow	Validation model for mixing volume with moisture input and flow reversal
MixingVolumeMoistureReverseFlowPrescribedHeatFlowRate	Validation model for mixing volume with moisture input and flow reversal and prescribed heat flow rate
MixingVolumeSteadyStateMass	Test model for steady state mass dynamics
MixingVolumeTraceSubstance	Test model for mixing volume with trace substance input
MixingVolumeTraceSubstanceReverseFlow	Validation model for mixing volume with trace substance input and flow reversal
MixingVolumeTraceSubstanceReverseFlowPrescribedHeatFlowRate	Validation model for mixing volume with trace substance input and flow reversal, and prescribed heat flow rate
MixingVolumeZeroFlow	Mixing volume verification around zero flow with heat exchange
MoistureMixingConservationDynamicBalance	This test checks if mass and energy is conserved when mixing fluid streams using dynamic balances
MoistureMixingConservationSteadyState	This test checks if mass and energy is conserved when mixing fluid streams using steady state balances
TraceSubstanceConservationDynamicBalance	This test checks if trace substance mass flow rates are conserved when a dynamic balance is used
TraceSubstanceConservationSteadyState	This test checks if trace substance mass flow rates are conserved when steady state
BaseClasses	Baseclasses package