.BuildingControlLib.BuildingControl.VDI3813.SensorFunctions.Examples.TesterAirTemperatureMeasurement .BuildingControlLib.BuildingControl.VDI3813.SensorFunctions.Examples.TesterAirTemperatureMeasurementSimulation to check the behaviour of the function models of "Air temperature measurement" from VDI 3813 [1, section 6.1.5, p. 13].
"The sensor functionAir temperature measurement (RA-FL section 2, column 4; informative function block Figure 6) is used to measure the air temperature of the room and, in air-bound heating and cooling systems, also the extract and supply air temperatures as well as the outdoor temperature. Room, supply or extract air temperatures are the input information for heating and cooling functions, whereas the outdoor temperature is required, e. g., for night-time cooling, summer compensation or for weather protection functions of the sunshade." [1, section 6.1.5, p. 13]
The simulation contains a thermal sensor that measures the temperature of a thermal conductor and sends it to a converter for changing the signal type from Modelica standard type to VDI 3813 semantic type. From there the signal goes to the four different implementations of air temperature measurement functions. All slope parameters are set to 1. Because of that all output slopes should be the same. For the y intercept values from 1 to 4 in steps of 1 had been chosen. The four outputs should be similar, but shifted on the y axis.