modelZoneAirvolumeThermal1x1x1
Zone with 1 x 1 x 1 air elements
Extends from BuildingSystems.Buildings.Zones.ZoneTemplateAirvolume3D (Template model for a thermal zone with 3D discretized air volume).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Geometry › Zone geometry | |||
| BuildingSystems.Buildings.Types.GeometryType | geometryType (from ZoneTemplateGeneral) | BuildingSystems.Buildings.Types.GeometryType.Fixed | Fixed (default) or flexible geometry |
| Modelica.Units.SI.Volume | V (from ZoneTemplateGeneral) | 1.0 | Air volume of the zone (if geometryType == Fixed) |
| Modelica.Units.SI.Length[3] | position (from ZoneTemplateGeneral) | {0.0, 0.0, 0.0} | Position (if geometryType == Fixed) |
| General › Air change | |||
| Modelica.Units.SI.Length | height (from ZoneTemplateGeneral) | 1.0 | Vertical height of the zone |
| Boolean | prescribedAirchange (from ZoneTemplateGeneral) | true | True: zone air change rate is prescribed by zone ambience; false: air path calculation |
| Advanced › Convection model on building facades | |||
| BuildingSystems.HAM.ConvectiveHeatTransfer.Types.Convection | convectionOnSurfaces (from ZoneTemplateGeneral) | BuildingSystems.HAM.ConvectiveHeatTransfer.Types.Convection.const | Type of convection calculation of the zone surfaces |
| Modelica.Units.SI.SurfaceCoefficientOfHeatTransfer | alphaConstant (from ZoneTemplateGeneral) | 1.0 | Convective heat transfer coefficient for simplified calculations |
| General › Ports | |||
| Integer | nMoistureSources (from ZoneTemplateGeneral) | 0 | Number of internal moisture sources of the thermal zone |
| Integer | nConstructions (from ZoneTemplateGeneral) | 0 | Number of constructions |
| Integer | nAirpaths (from ZoneTemplateGeneral) | 0 | Number of external air paths |
| Geometry › View Factors | |||
| BuildingSystems.Buildings.Types.ViewFactorCalculationType | viewFacCalcType (from ZoneTemplateGeneral) | BuildingSystems.Buildings.Types.ViewFactorCalculationType.AreaWeighted | Surface area weighted (default), geometric view factors or external calculated view factors |
| BuildingSystems.Types.ViewFactor[nSurfaces,nSurfaces] | ViewFac (from ZoneTemplateGeneral) | fill(fill(0.0, nSurfaces), nSurfaces) | Geometric view factor matrix of the thermal zone |
| General | |||
| Integer | nAirElements (from ZoneTemplateAirvolume3D) | 1 | Number of air elements, which are included in the air volume |
| Initialization | |||
| Modelica.Units.SI.Temperature | T_start (from ZoneTemplateAirvolume3D) | 293.15 | Start air temperature of the zone |
| Modelica.Units.SI.MassFraction | x_start (from ZoneTemplateAirvolume3D) | 0.005 | Start air moisture of the zone |
Connectors
Components
| Type | Name | Default | Description |
|---|---|---|---|
| BuildingSystems.Buildings.Airvolumes.Airvolume3DTemplate | airvolume (from ZoneTemplateAirvolume3D) | Discretized air volume of the zone |