.BuildingSystems.Fluid.Chillers.Validation.Carnot_TEva_HighTemperature

Information

This example extends from BuildingSystems.Fluid.Chillers.Examples.Carnot_TEva but increases the set point for the leaving evaporator temperature to be above its inlet temperature, in which case the model provides no cooling. Towards the end of the simulation, the inlet temperature of the evaporator is increased to be above the condenser temperature. In this domain, the model requires cooling again. While this is not a meaningful operating point for the model, the example verifies that it robustly simulates this regime.

Revisions

• February 10, 2016, by Michael Wetter:
  First implementation.