modelPlugFlowPipe
Simple example of plug flow pipe
Extends from Modelica.Icons.Example (Icon for runnable examples).
Information
Basic test of model BuildingSystems.Fluid.FixedResistances.PlugFlowPipe with and without outlet mixing volume. This test includes an inlet temperature step under a constant mass flow rate.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Units.SI.MassFlowRate | m_flow_nominal | 3 | Mass flow rate |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Sources.Ramp | Tin | Ramp pressure signal | |
| Sources.Boundary_pT | sin | Pressure boundary condition | |
| BuildingSystems.Fluid.FixedResistances.PlugFlowPipe | pip | Pipe | |
| Modelica.Thermal.HeatTransfer.Sources.FixedTemperature[2] | bou | Boundary temperature | |
| BuildingSystems.Fluid.Sources.MassFlowSource_T | sou | Flow source | |
| BuildingSystems.Fluid.Sensors.TemperatureTwoPort | senTemOut | Temperature sensor | |
| BuildingSystems.Fluid.Sensors.TemperatureTwoPort | senTemIn | Temperature sensor | |
| Sensors.TemperatureTwoPort | senTemInNoMix | Temperature sensor | |
| BuildingSystems.Fluid.FixedResistances.PlugFlowPipe | pipNoMix | Pipe | |
| Sensors.TemperatureTwoPort | senTemOutNoMix | Temperature sensor | |
| Sources.MassFlowSource_T | souNoMix | Flow source |
Contents
| Name | Description |
|---|---|
 Medium | Medium in the pipe |
Revisions
- July 27, 2021 by Baptiste Ravache
Add case without mixing volume
- September 8, 2017 by Bram van der Heijde
First implementation