.BuildingSystems.Fluid.HeatExchangers.Validation

Information

This package contains models that validate the heat exchanger models. The examples plot various outputs, which have been verified against analytical solutions. These model outputs are stored as reference data to allow continuous validation whenever models in the library change.

Contents

NameDescription
 ConstantEffectivenessModel that demonstrates use of a heat exchanger with constant effectiveness
 DryCoilEffectivenessNTUModel that demonstrates use of a heat exchanger without condensation that uses the epsilon-NTU relation
 EvaporatorCondenserTest model for the evaporator or condenser model
 HeaterCooler_uModel that demonstrates the ideal heater model
 PrescribedOutletModel that demonstrates the ideal heater/cooler model for a prescribed outlet temperature, configured as steady-state
 PrescribedOutlet_dynamicModel that demonstrates the ideal heater/cooler model for a prescribed outlet temperature, configured as dynamic
 WetCoilEffectivenessNTUModel that validates the wet coil effectiveness-NTU model

Generated at 2024-11-26T19:26:15Z by OpenModelicaOpenModelica 1.24.2 using GenerateDoc.mos