modelPartialSafety
Safety control with I/O
Information
Partial block for a safety control. Based on the signals in the
sigBus either the input signals are equal to the output
signals or, if an error occurs, set to 0.
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealInput | ySet | Input for relative compressor speed from 0 to 1 | |
| Modelica.Blocks.Interfaces.RealOutput | yOut | Output for relative compressor speed from 0 to 1 | |
| BuildingSystems.Fluid.HeatPumps.ModularReversible.BaseClasses.RefrigerantMachineControlBus | sigBus | Bus-connector for the heat pump |
Revisions
-
November 26, 2018 by Fabian Wuellhorst:
First implementation (see issue AixLib #577)