.BuildingSystems.Fluid.Sensors.VolumeFlowRate

Ideal sensor for volume flow rate

Information

This model outputs the volume flow rate flowing from port_a to port_b. The sensor is ideal, i.e., it does not influence the fluid. If the parameter tau is non-zero, then the measured density that is used to convert the mass flow rate into volumetric flow rate is computed using a first order differential equation. Setting tau=0 is not recommend. See BuildingSystems.Fluid.Sensors.UsersGuide for an explanation.

Revisions


Generated at 2025-04-05T18:20:13Z by OpenModelicaOpenModelica 1.25.0 using GenerateDoc.mos