This model demonstrates the use of trace substances that are added
to a volume of air.
The source is a step function of 2 kg/s CO2 from t=0 second
to t=0.5 second.
The sensors C
and C1
measure the same concentration that initially increases
and then remains constant as there is no flow through the volumes vol
and vol1
.
The sensors
C2
and
C3
first meaure an increase in concentration, which then decays to zero
as there is a mass flow rate with zero CO2 from the source bou
to the sink sin
.
Contents
-
March 26, 2024, by Michael Wetter:
Configured the sensor parameter to suppress the warning about being a one-port connection.
This is for
IBPSA, #1857.
-
November 27, 2013 by Michael Wetter:
Added pressure boundary condition to model.
This is required for the new air model,
which is incompressible. Otherwise, there will be no pressure reference
in the system.
-
September 19, 2013, by Michael Wetter:
Simplified example.
-
April 29, 2013, by Michael Wetter:
Changed the initialization of the medium volumes from free initial conditions
to Modelica.Fluid.Types.Dynamics.FixedInitial
.
This was required for vol
and vol1
to have the same
computations for the initial states.
-
September 18, 2008 by Michael Wetter:
First implementation.
Generated at 2024-12-23T19:25:42Z
by OpenModelicaOpenModelica 1.24.3 using GenerateDoc.mos