.BuildingSystems.Interfaces.FlowPort

Information

This connector is used for the fluid flow between components. The variables in the connector are:

      m_flow          Mass flow rate in [kg/s].
      p               Thermodynamic pressure in [Pa].
      h_outflow       Specific thermodynamic enthalpy in [J/kg];
      Xi_outflow      Independent mixture mass fractions m_i/m close [kg/kg]
      C_outflow       Properties c_i/m []
    

According to the Modelica sign convention, a positive mass flow rate m_flow is considered to flow into a component. This convention has to be used whenever this connector is used in a model class.


Generated at 2020-04-08T01:39:33Z by OpenModelicaOpenModelica 1.16.0~dev-268-gc5be668 using GenerateDoc.mos