.BuildingSystems.Interfaces.MoisturePortGeneral

Information

This connector is used for the moisture flow between components. The variables in the connector are:

       x       Absolute moisture in [kg water vapor/kg dry air].
       m_flow  Mass flow rate water vapor in [kg/s].
    

According to the Modelica sign convention, a positive moisture flow rate m_flow is considered to flow into a component. This convention has to be used whenever this connector is used in a model class.


Generated at 2020-04-08T01:39:33Z by OpenModelicaOpenModelica 1.16.0~dev-268-gc5be668 using GenerateDoc.mos