modelUPartialClass
Extends from BuildingSystems.Technologies.DistrictHeatingNetworks.UndergroundPipes.BaseClasses.PipeInfo.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Integer | nPipes | Number of pipes | |
| General › Geometry | |||
| Modelica.Units.SI.Area | SPip | (Modelica.Constants.pi*d_o*d_o/4) - SWat | Cross-sectional wall area of the pipe (area of piping material) |
| Modelica.Units.SI.Area | SWat | (Modelica.Constants.pi*d_i*d_i/4) | Cross-sectional inside area of the pipe |
| Modelica.Units.SI.Diameter | d_i (from PipeInfo) | Pipe's inner diameter | |
| Modelica.Units.SI.Diameter | d_o (from PipeInfo) | d_i/(0.0366*Modelica.Math.log(d_i) + 0.769) | Pipe's outter diameter |
| Modelica.Units.SI.Thickness | th_ins (from PipeInfo) | 0.05 | Insulation's thickness |
| Modelica.Units.SI.Thickness | th_c (from PipeInfo) | 0.005 | Cover's thickness |
| General › Thermal properties | |||
| Modelica.Units.SI.Density | den_p | 8 | Density of the pipe material |
| Modelica.Units.SI.SpecificHeatCapacity | cp_p | 0.49 | Specific heat capacity of the pipe material |
| Modelica.Units.SI.ThermalConductivity | lam_ins (from PipeInfo) | 0.032 | Heat conductivity of the pipe's insulation |
| Modelica.Units.SI.ThermalConductivity | lam_c (from PipeInfo) | 0.43 | Heat conductivity of the covers material |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Interfaces.RealOutput | U |