.Buildings.DHC.Loads.BaseClasses.BuildingRCZ6

Six-zone RC building model based on URBANopt GeoJSON export, with distribution pumps

Information

This is a simplified six-zone building model based on two-element reduced order model. It was generated from translating a GeoJSON model specified within the URBANopt UI. The heating and cooling loads are computed with a four-pipe fan coil unit model derived from Buildings.DHC.Loads.BaseClasses.PartialTerminalUnit and connected to the room model by means of heat ports.

Contents

NameDescription
 Medium2Load side medium

Revisions

Generated at 2025-04-03T18:24:42Z by OpenModelicaOpenModelica 1.24.5 using GenerateDoc.mos