.Buildings.Electrical.Interfaces.VariableVoltageSource

Information

This model represents a generic variable voltage source. The model has a boolean flag use_V_in, when this flag is equal to true the voltage of the source is imposed by the input variable V_in. When the flag is equal to false the voltage source is equal to the parameter V.

In case the phase system adopted has PhaseSystem.m > 0 and thus the connectors are over determined, the source can be selected to serve as reference point. The parameters potentialReference and definiteReference are used to define if the source model should be selected as source for the reference angles or not. More information about overdetermined connectors can be found in Olsson Et Al. (2008).

References

Hans Olsson, Martin Otter, Sven Erik Mattson and Hilding Elmqvist.
Balanced Models in Modelica 3.0 for Increased Model Quality.
Proc. of the 7th Modelica Conference, Bielefeld, Germany, March 2008.

Revisions


Generated at 2024-03-28T19:15:55Z by OpenModelicaOpenModelica 1.22.3 using GenerateDoc.mos