Controller for fan revolution
PI controller for the fan speed. The controller outputs y = 0 if the fan control signal is off, e.g., if uFan = false.
-
May 2, 2021, by Michael Wetter:
Changed controller to the version from Buildings.Controls.OBC.CDL,
and enabled reset trigger.
-
December 20, 2016, by Michael Wetter:
Added type conversion for enumeration when used as an array index.
This is for
#602.
Generated at 2026-03-06T19:22:04Z
by OpenModelicaOpenModelica 1.26.3 using GenerateDoc.mos