This example demonstrates the open loop response of the boiler
model for a control signal that is first a ramp from 0
to 1, followed by a step that switches the boilers off and
then on again.
The instances of the boiler models are parameterized
so that boi1 is a dynamic model and
boi2 is a steady-state model.
Contents
| Name | Description |
|---|
| Medium | Medium model |
-
January 22, 2016, by Michael Wetter:
Corrected type declaration of pressure difference.
This is
for #404.
-
December 22, 2014 by Michael Wetter:
Removed Modelica.Fluid.System
to address issue
#311.
-
April 27, 2013, by Michael Wetter:
Removed first order filter from the output of the table.
This is not needed and leads to a dynamic state selection.
-
November 1, 2011 by Michael Wetter:
First implementation.
Generated at 2024-04-24T18:15:52Z
by OpenModelicaOpenModelica 1.22.3 using GenerateDoc.mos