.Buildings.Fluid.CHPs.Data.ValidationData1

Information

This is the record of parameters for CHP models derived from the parameters of EnergyPlus example MicroCogeneration, with following changes:

• changed the condition of the warm-up mode, from depending on the time delay to engine temperature.
• changed the minimum cooling water flow rate mWatMin_flow from 0 to 0.1 kg/s.
• limited the maximum rate of change in the power output dPEleMax and the maximum rate of change in the fuel mass flow rate dmFueMax_flow, by reducing from 1e+9 to 200 and from 1e+9 to 2 respectively.
• changed electric power consumptions during standby PStaBy and cool-down PCooDow mode from 0 W to 100 W and 200 W respectively.

Revisions

• March 08, 2019, by Tea Zakula:
  First implementation.