Performance data for chiller model.
This data corresponds to the following EnergyPlus model:
Chiller:Electric:EIR,
DOE-2 Reciprocating/3.67COP, !- Name
Autosize, !- Reference Capacity {W}
3.67, !- Reference COP {W/W}
6.67, !- Reference Leaving Chilled Water Temperature {C}
29.4, !- Reference Entering Condenser Fluid Temperature {C}
Autosize, !- Reference Chilled Water Flow Rate {m3/s}
Autosize, !- Reference Condenser Water Flow Rate {m3/s}
DOE-2 Reciprocating/3.67COP CAPFT, !- Cooling Capacity Function of Temperature Curve Name
DOE-2 Reciprocating/3.67COP EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
DOE-2 Reciprocating/3.67COP EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
0.1, !- Minimum Part Load Ratio
1.0, !- Maximum Part Load Ratio
1.0, !- Optimum Part Load Ratio
0.2, !- Minimum Unloading Ratio
Chilled Water Side Inlet Node, !- Chilled Water Inlet Node Name
Chilled Water Side Outlet Node, !- Chilled Water Outlet Node Name
Condenser Side Inlet Node, !- Condenser Inlet Node Name
Condenser Side Outlet Node, !- Condenser Outlet Node Name
WaterCooled, !- Condenser Type
, !- Condenser Fan Power Ratio {W/W}
1.0, !- Compressor Motor Efficiency
2.0, !- Leaving Chilled Water Lower Temperature Limit {C}
ConstantFlow; !- Chiller Flow Mode
record DOE_2_Reciprocating_3_67COP = Buildings.Fluid.Chillers.Data.ElectricEIR.Generic(QEva_flow_nominal = -100000.0, COP_nominal = 3.67, PLRMin = 0.1, PLRMinUnl = 0.2, PLRMax = 1.0, mEva_flow_nominal = 1000*0.0022, mCon_flow_nominal = 1000*0.0044, TEvaLvg_nominal = 273.15 + 6.67, TConEnt_nominal = 273.15 + 29.4, TEvaLvgMin = 273.15 + 5.0, TEvaLvgMax = 273.15 + 10.0, TConEntMin = 273.15 + 24.0, TConEntMax = 273.15 + 35.0, capFunT = {0.507883E+00, 0.145228E+00, -0.625644E-02, -0.111780E-02, -0.129600E-03, -0.281880E-03}, EIRFunT = {0.103076E+01, -0.103536E+00, 0.710208E-02, 0.931860E-02, 0.317520E-03, -0.104328E-02}, EIRFunPLR = {0.088065, 1.137742, -0.225806}, etaMotor = 1.0);
Generated at 2024-11-22T19:25:38Z
by OpenModelicaOpenModelica 1.24.2 using GenerateDoc.mos