Performance data for chiller model.
This data corresponds to the following EnergyPlus model:
Chiller:Electric:EIR,
ElectricEIRChiller Carrier 19XR 1635kW/6.36COP/Vanes, !- Name
1635200, !- Reference Capacity {W}
6.36, !- Reference COP {W/W}
8.89, !- Reference Leaving Chilled Water Temperature {C}
26.67, !- Reference Entering Condenser Fluid Temperature {C}
0.03432, !- Reference Chilled Water Flow Rate {m3/s}
0.05035, !- Reference Condenser Water Flow Rate {m3/s}
ElectricEIRChiller Carrier 19XR 1635kW/6.36COP/Vanes CAPFT, !- Cooling Capacity Function of Temperature Curve Name
ElectricEIRChiller Carrier 19XR 1635kW/6.36COP/Vanes EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
ElectricEIRChiller Carrier 19XR 1635kW/6.36COP/Vanes EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
0.18, !- Minimum Part Load Ratio
1.05, !- Maximum Part Load Ratio
1.0, !- Optimum Part Load Ratio
0.18, !- Minimum Unloading Ratio
Chilled Water Side Inlet Node, !- Chilled Water Inlet Node Name
Chilled Water Side Outlet Node, !- Chilled Water Outlet Node Name
Condenser Side Inlet Node, !- Condenser Inlet Node Name
Condenser Side Outlet Node, !- Condenser Outlet Node Name
WaterCooled, !- Condenser Type
, !- Condenser Fan Power Ratio {W/W}
1.0, !- Compressor Motor Efficiency
2.0, !- Leaving Chilled Water Lower Temperature Limit {C}
ConstantFlow, !- Chiller Flow Mode
0.0; !- Design Heat Recovery Water Flow Rate {m3/s}
record ElectricEIRChiller_Carrier_19XR_1635kW_6_36COP_Vanes = Buildings.Fluid.Chillers.Data.ElectricEIR.Generic(QEva_flow_nominal = -1635200, COP_nominal = 6.36, PLRMin = 0.18, PLRMinUnl = 0.18, PLRMax = 1.05, mEva_flow_nominal = 1000*0.03432, mCon_flow_nominal = 1000*0.05035, TEvaLvg_nominal = 273.15 + 8.89, TConEnt_nominal = 273.15 + 26.67, TEvaLvgMin = 273.15 + 7.22, TEvaLvgMax = 273.15 + 12.78, TConEntMin = 273.15 + 12.78, TConEntMax = 273.15 + 26.67, capFunT = {7.639212E-01, 1.160405E-02, -5.344185E-03, 3.306796E-02, -2.100827E-03, 4.920586E-03}, EIRFunT = {7.355981E-01, -1.083354E-02, -9.244662E-04, 1.458943E-02, 8.494647E-06, 1.279572E-04}, EIRFunPLR = {2.581595E-01, 2.707154E-01, 4.707425E-01}, etaMotor = 1.0);
Generated at 2024-11-22T19:25:38Z
by OpenModelicaOpenModelica 1.24.2 using GenerateDoc.mos