Performance data for chiller model.
This data corresponds to the following EnergyPlus model:
Chiller:Electric:EIR,
ElectricEIRChiller Trane CVHE 1484kW/9.96COP/VSD, !- Name
1484000, !- Reference Capacity {W}
9.96, !- Reference COP {W/W}
4.44, !- Reference Leaving Chilled Water Temperature {C}
12.78, !- Reference Entering Condenser Fluid Temperature {C}
0.07571, !- Reference Chilled Water Flow Rate {m3/s}
0.09085, !- Reference Condenser Water Flow Rate {m3/s}
ElectricEIRChiller Trane CVHE 1484kW/9.96COP/VSD CAPFT, !- Cooling Capacity Function of Temperature Curve Name
ElectricEIRChiller Trane CVHE 1484kW/9.96COP/VSD EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
ElectricEIRChiller Trane CVHE 1484kW/9.96COP/VSD EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
0.24, !- Minimum Part Load Ratio
1.06, !- Maximum Part Load Ratio
1.0, !- Optimum Part Load Ratio
0.24, !- Minimum Unloading Ratio
Chilled Water Side Inlet Node, !- Chilled Water Inlet Node Name
Chilled Water Side Outlet Node, !- Chilled Water Outlet Node Name
Condenser Side Inlet Node, !- Condenser Inlet Node Name
Condenser Side Outlet Node, !- Condenser Outlet Node Name
WaterCooled, !- Condenser Type
, !- Condenser Fan Power Ratio {W/W}
1.0, !- Compressor Motor Efficiency
2.0, !- Leaving Chilled Water Lower Temperature Limit {C}
ConstantFlow, !- Chiller Flow Mode
0.0; !- Design Heat Recovery Water Flow Rate {m3/s}
record ElectricEIRChiller_Trane_CVHE_1484kW_9_96COP_VSD = Buildings.Fluid.Chillers.Data.ElectricEIR.Generic(QEva_flow_nominal = -1484000, COP_nominal = 9.96, PLRMin = 0.24, PLRMinUnl = 0.24, PLRMax = 1.06, mEva_flow_nominal = 1000*0.07571, mCon_flow_nominal = 1000*0.09085, TEvaLvg_nominal = 273.15 + 4.44, TConEnt_nominal = 273.15 + 12.78, TEvaLvgMin = 273.15 + 4.44, TEvaLvgMax = 273.15 + 8.89, TConEntMin = 273.15 + 12.78, TConEntMax = 273.15 + 29.44, capFunT = {-4.544480E-01, -3.615933E-02, -2.734006E-03, 1.683863E-01, -4.557649E-03, 5.362840E-03}, EIRFunT = {-3.693940E-01, -6.387787E-02, -2.760494E-04, 1.661135E-01, -3.105485E-03, 1.705909E-03}, EIRFunPLR = {1.353827E-01, 1.385983E-02, 8.522688E-01}, etaMotor = 1.0);
Generated at 2024-11-12T19:25:41Z
by OpenModelicaOpenModelica 1.24.0 using GenerateDoc.mos