Performance data for chiller model.
This data corresponds to the following EnergyPlus model:
Chiller:Electric:EIR,
ElectricEIRChiller Trane CVHF 1779kW/6.18COP/Vanes, !- Name
1779400, !- Reference Capacity {W}
6.18, !- Reference COP {W/W}
5.56, !- Reference Leaving Chilled Water Temperature {C}
23.89, !- Reference Entering Condenser Fluid Temperature {C}
0.04454, !- Reference Chilled Water Flow Rate {m3/s}
0.05142, !- Reference Condenser Water Flow Rate {m3/s}
ElectricEIRChiller Trane CVHF 1779kW/6.18COP/Vanes CAPFT, !- Cooling Capacity Function of Temperature Curve Name
ElectricEIRChiller Trane CVHF 1779kW/6.18COP/Vanes EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
ElectricEIRChiller Trane CVHF 1779kW/6.18COP/Vanes EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
0.10, !- Minimum Part Load Ratio
1.02, !- Maximum Part Load Ratio
1.0, !- Optimum Part Load Ratio
0.10, !- Minimum Unloading Ratio
Chilled Water Side Inlet Node, !- Chilled Water Inlet Node Name
Chilled Water Side Outlet Node, !- Chilled Water Outlet Node Name
Condenser Side Inlet Node, !- Condenser Inlet Node Name
Condenser Side Outlet Node, !- Condenser Outlet Node Name
WaterCooled, !- Condenser Type
, !- Condenser Fan Power Ratio {W/W}
1.0, !- Compressor Motor Efficiency
2.0, !- Leaving Chilled Water Lower Temperature Limit {C}
ConstantFlow, !- Chiller Flow Mode
0.0; !- Design Heat Recovery Water Flow Rate {m3/s}
record ElectricEIRChiller_Trane_CVHF_1779kW_6_18COP_Vanes = Buildings.Fluid.Chillers.Data.ElectricEIR.Generic(QEva_flow_nominal = -1779400, COP_nominal = 6.18, PLRMin = 0.10, PLRMinUnl = 0.10, PLRMax = 1.02, mEva_flow_nominal = 1000*0.04454, mCon_flow_nominal = 1000*0.05142, TEvaLvg_nominal = 273.15 + 5.56, TConEnt_nominal = 273.15 + 23.89, TEvaLvgMin = 273.15 + 5.56, TEvaLvgMax = 273.15 + 10.00, TConEntMin = 273.15 + 18.33, TConEntMax = 273.15 + 23.89, capFunT = {3.331346E-01, -5.678656E-02, -1.257764E-03, 8.198893E-02, -2.612490E-03, 4.226087E-03}, EIRFunT = {3.137523E-01, -1.879556E-02, -1.860907E-03, 3.469711E-02, -1.503480E-04, 7.641242E-04}, EIRFunPLR = {1.699409E-01, 1.874304E-01, 6.410385E-01}, etaMotor = 1.0);
Generated at 2024-11-12T19:25:41Z
by OpenModelicaOpenModelica 1.24.0 using GenerateDoc.mos