Performance data for chiller model.
This data corresponds to the following EnergyPlus model:
Chiller:Electric:EIR,
ElectricEIRChiller Trane CVHF 2799kW/6.40COP/Vanes, !- Name
2799200, !- Reference Capacity {W}
6.40, !- Reference COP {W/W}
6.67, !- Reference Leaving Chilled Water Temperature {C}
26.11, !- Reference Entering Condenser Fluid Temperature {C}
0.09893, !- Reference Chilled Water Flow Rate {m3/s}
0.13761, !- Reference Condenser Water Flow Rate {m3/s}
ElectricEIRChiller Trane CVHF 2799kW/6.40COP/Vanes CAPFT, !- Cooling Capacity Function of Temperature Curve Name
ElectricEIRChiller Trane CVHF 2799kW/6.40COP/Vanes EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
ElectricEIRChiller Trane CVHF 2799kW/6.40COP/Vanes EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
0.20, !- Minimum Part Load Ratio
1.04, !- Maximum Part Load Ratio
1.0, !- Optimum Part Load Ratio
0.20, !- Minimum Unloading Ratio
Chilled Water Side Inlet Node, !- Chilled Water Inlet Node Name
Chilled Water Side Outlet Node, !- Chilled Water Outlet Node Name
Condenser Side Inlet Node, !- Condenser Inlet Node Name
Condenser Side Outlet Node, !- Condenser Outlet Node Name
WaterCooled, !- Condenser Type
, !- Condenser Fan Power Ratio {W/W}
1.0, !- Compressor Motor Efficiency
2.0, !- Leaving Chilled Water Lower Temperature Limit {C}
ConstantFlow, !- Chiller Flow Mode
0.0; !- Design Heat Recovery Water Flow Rate {m3/s}
record ElectricEIRChiller_Trane_CVHF_2799kW_6_40COP_Vanes = Buildings.Fluid.Chillers.Data.ElectricEIR.Generic(QEva_flow_nominal = -2799200, COP_nominal = 6.40, PLRMin = 0.20, PLRMinUnl = 0.20, PLRMax = 1.04, mEva_flow_nominal = 1000*0.09893, mCon_flow_nominal = 1000*0.13761, TEvaLvg_nominal = 273.15 + 6.67, TConEnt_nominal = 273.15 + 26.11, TEvaLvgMin = 273.15 + 4.44, TEvaLvgMax = 273.15 + 8.89, TConEntMin = 273.15 + 15.56, TConEntMax = 273.15 + 29.44, capFunT = {2.210324E-01, -2.752320E-02, 4.903763E-04, 7.337449E-02, -1.919426E-03, 1.935659E-03}, EIRFunT = {2.267558E-01, -7.615857E-02, 2.140583E-03, 7.088812E-02, -1.124968E-03, 6.089843E-04}, EIRFunPLR = {3.023576E-01, -2.893592E-02, 7.262269E-01}, etaMotor = 1.0);
Generated at 2024-11-12T19:25:41Z
by OpenModelicaOpenModelica 1.24.0 using GenerateDoc.mos