Performance data for chiller model.
This data corresponds to the following EnergyPlus model:
Chiller:Electric:EIR,
ElectricEIRChiller York YK 1997kW/7.24COP/Vanes, !- Name
1997400, !- Reference Capacity {W}
7.24, !- Reference COP {W/W}
8.89, !- Reference Leaving Chilled Water Temperature {C}
26.67, !- Reference Entering Condenser Fluid Temperature {C}
0.04397, !- Reference Chilled Water Flow Rate {m3/s}
0.1041, !- Reference Condenser Water Flow Rate {m3/s}
ElectricEIRChiller York YK 1997kW/7.24COP/Vanes CAPFT, !- Cooling Capacity Function of Temperature Curve Name
ElectricEIRChiller York YK 1997kW/7.24COP/Vanes EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
ElectricEIRChiller York YK 1997kW/7.24COP/Vanes EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
0.18, !- Minimum Part Load Ratio
1.06, !- Maximum Part Load Ratio
1.0, !- Optimum Part Load Ratio
0.18, !- Minimum Unloading Ratio
Chilled Water Side Inlet Node, !- Chilled Water Inlet Node Name
Chilled Water Side Outlet Node, !- Chilled Water Outlet Node Name
Condenser Side Inlet Node, !- Condenser Inlet Node Name
Condenser Side Outlet Node, !- Condenser Outlet Node Name
WaterCooled, !- Condenser Type
, !- Condenser Fan Power Ratio {W/W}
1.0, !- Compressor Motor Efficiency
2.0, !- Leaving Chilled Water Lower Temperature Limit {C}
ConstantFlow, !- Chiller Flow Mode
0.0; !- Design Heat Recovery Water Flow Rate {m3/s}
record ElectricEIRChiller_York_YK_1997kW_7_24COP_Vanes = Buildings.Fluid.Chillers.Data.ElectricEIR.Generic(QEva_flow_nominal = -1997400, COP_nominal = 7.24, PLRMin = 0.18, PLRMinUnl = 0.18, PLRMax = 1.06, mEva_flow_nominal = 1000*0.04397, mCon_flow_nominal = 1000*0.1041, TEvaLvg_nominal = 273.15 + 8.89, TConEnt_nominal = 273.15 + 26.67, TEvaLvgMin = 273.15 + 7.22, TEvaLvgMax = 273.15 + 12.78, TConEntMin = 273.15 + 12.78, TConEntMax = 273.15 + 26.67, capFunT = {9.058272E-01, 1.309175E-01, -3.446620E-03, -3.166792E-02, 2.325200E-04, -4.892256E-04}, EIRFunT = {1.188194E-01, 8.769791E-02, -1.692086E-03, 2.209962E-03, 1.327958E-03, -3.249833E-03}, EIRFunPLR = {9.359332E-02, 5.873752E-01, 3.208990E-01}, etaMotor = 1.0);
Generated at 2024-11-12T19:25:41Z
by OpenModelicaOpenModelica 1.24.0 using GenerateDoc.mos