Performance data for chiller model.
This data corresponds to the following EnergyPlus model:
Chiller:Electric:EIR,
ElectricEIRChiller York YS 1171kW/9.15COP/Valve, !- Name
1171000, !- Reference Capacity {W}
9.15, !- Reference COP {W/W}
6.11, !- Reference Leaving Chilled Water Temperature {C}
15.56, !- Reference Entering Condenser Fluid Temperature {C}
0.03249, !- Reference Chilled Water Flow Rate {m3/s}
0.05173, !- Reference Condenser Water Flow Rate {m3/s}
ElectricEIRChiller York YS 1171kW/9.15COP/Valve CAPFT, !- Cooling Capacity Function of Temperature Curve Name
ElectricEIRChiller York YS 1171kW/9.15COP/Valve EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
ElectricEIRChiller York YS 1171kW/9.15COP/Valve EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
0.09, !- Minimum Part Load Ratio
1.01, !- Maximum Part Load Ratio
1.0, !- Optimum Part Load Ratio
0.09, !- Minimum Unloading Ratio
Chilled Water Side Inlet Node, !- Chilled Water Inlet Node Name
Chilled Water Side Outlet Node, !- Chilled Water Outlet Node Name
Condenser Side Inlet Node, !- Condenser Inlet Node Name
Condenser Side Outlet Node, !- Condenser Outlet Node Name
WaterCooled, !- Condenser Type
, !- Condenser Fan Power Ratio {W/W}
1.0, !- Compressor Motor Efficiency
2.0, !- Leaving Chilled Water Lower Temperature Limit {C}
ConstantFlow, !- Chiller Flow Mode
0.0; !- Design Heat Recovery Water Flow Rate {m3/s}
record ElectricEIRChiller_York_YS_1171kW_9_15COP_Valve = Buildings.Fluid.Chillers.Data.ElectricEIR.Generic(QEva_flow_nominal = -1171000, COP_nominal = 9.15, PLRMin = 0.09, PLRMinUnl = 0.09, PLRMax = 1.01, mEva_flow_nominal = 1000*0.03249, mCon_flow_nominal = 1000*0.05173, TEvaLvg_nominal = 273.15 + 6.11, TConEnt_nominal = 273.15 + 15.56, TEvaLvgMin = 273.15 + 6.11, TEvaLvgMax = 273.15 + 12.78, TConEntMin = 273.15 + 15.56, TConEntMax = 273.15 + 23.89, capFunT = {9.299045E-01, 2.350383E-02, -4.649409E-04, -4.367237E-03, -2.040112E-04, 6.430038E-04}, EIRFunT = {5.325834E-01, -2.611733E-02, 1.365012E-03, 4.099324E-02, 3.401995E-04, -1.514251E-03}, EIRFunPLR = {1.889392E-01, 4.684305E-01, 3.451545E-01}, etaMotor = 1.0);
Generated at 2024-11-12T19:25:41Z
by OpenModelicaOpenModelica 1.24.0 using GenerateDoc.mos