Performance data for chiller model.
This data corresponds to the following EnergyPlus model:
Chiller:Electric:EIR,
ElectricEIRChiller York YT 1934kW/7.55COP/Vanes, !- Name
1934100, !- Reference Capacity {W}
7.55, !- Reference COP {W/W}
5.56, !- Reference Leaving Chilled Water Temperature {C}
13.89, !- Reference Entering Condenser Fluid Temperature {C}
0.05552, !- Reference Chilled Water Flow Rate {m3/s}
0.08675, !- Reference Condenser Water Flow Rate {m3/s}
ElectricEIRChiller York YT 1934kW/7.55COP/Vanes CAPFT, !- Cooling Capacity Function of Temperature Curve Name
ElectricEIRChiller York YT 1934kW/7.55COP/Vanes EIRFT, !- Electric Input to Cooling Output Ratio Function of Temperature Curve Name
ElectricEIRChiller York YT 1934kW/7.55COP/Vanes EIRFPLR, !- Electric Input to Cooling Output Ratio Function of Part Load Ratio Curve Name
0.10, !- Minimum Part Load Ratio
1.06, !- Maximum Part Load Ratio
1.0, !- Optimum Part Load Ratio
0.10, !- Minimum Unloading Ratio
Chilled Water Side Inlet Node, !- Chilled Water Inlet Node Name
Chilled Water Side Outlet Node, !- Chilled Water Outlet Node Name
Condenser Side Inlet Node, !- Condenser Inlet Node Name
Condenser Side Outlet Node, !- Condenser Outlet Node Name
WaterCooled, !- Condenser Type
, !- Condenser Fan Power Ratio {W/W}
1.0, !- Compressor Motor Efficiency
2.0, !- Leaving Chilled Water Lower Temperature Limit {C}
ConstantFlow, !- Chiller Flow Mode
0.0; !- Design Heat Recovery Water Flow Rate {m3/s}
record ElectricEIRChiller_York_YT_1934kW_7_55COP_Vanes = Buildings.Fluid.Chillers.Data.ElectricEIR.Generic(QEva_flow_nominal = -1934100, COP_nominal = 7.55, PLRMin = 0.10, PLRMinUnl = 0.10, PLRMax = 1.06, mEva_flow_nominal = 1000*0.05552, mCon_flow_nominal = 1000*0.08675, TEvaLvg_nominal = 273.15 + 5.56, TConEnt_nominal = 273.15 + 13.89, TEvaLvgMin = 273.15 + 5.56, TEvaLvgMax = 273.15 + 8.89, TConEntMin = 273.15 + 12.78, TConEntMax = 273.15 + 29.44, capFunT = {4.420318E-02, 1.103599E-01, -2.597752E-03, 7.043754E-02, -2.138316E-03, -4.696924E-04}, EIRFunT = {1.173674E+00, -1.301647E-01, 5.588446E-03, 8.605153E-03, 7.234201E-05, 1.314581E-03}, EIRFunPLR = {1.706237E-01, 6.063362E-01, 2.170672E-01}, etaMotor = 1.0);
Generated at 2024-11-12T19:25:41Z
by OpenModelicaOpenModelica 1.24.0 using GenerateDoc.mos