.Buildings.Fluid.Chillers.Validation .Buildings.Fluid.Chillers.ValidationThis package contains models that validate the chiller models. The examples plot various outputs, which have been verified against analytical solutions. These model outputs are stored as reference data to allow continuous validation whenever models in the library change.
| Name | Description |
|---|---|
 AbsorptionIndirectSteam_EnergyPlus | Validation with EnergyPlus model |
 CarnotVerifyCOP | Test model to verify the COP computation for non-zero approach temperatures |
 CarnotVerifyEtaCarnot | Test model to verify the Carnot effectiveness computation for non-zero approach temperatures |
 Carnot_TEva_2ndLaw | Test model to verify that the 2nd law is not violated |
 Carnot_TEva_HighTemperature | Test model for Carnot_TEva with high evaporator temperature |
 Carnot_TEva_LimitedCapacity | Test model for Carnot_TEva with limited heating capacity |
 Carnot_TEva_etaPL | Test model for the part load efficiency curve with evaporator leaving temperature as input signal |
 Carnot_TEva_reverseFlow | Test model for chiller based on Carnot efficiency and evaporator outlet temperature control signal |
 Carnot_y_etaPL | Test model for the part load efficiency curve with compressor speed as input signal |