.Buildings.Fluid.DXSystems.Cooling.AirSource.Data.DoubleSpeed.Lennox_KCA120S4

Information

Performance data for double speed air source cooling coil model. This data corresponds to the following EnergyPlus model:

Coil:Cooling:DX:TwoStageWithHumidityControlMode,
    Lennox KCA120S4,               !- Name
    CoolingCoilAvailSched,         !- Availability Schedule Name
    DXCoilAirInletNode,            !- Air Inlet Node Name
    DXCoilAirOutletNode,           !- Air Outlet Node Name
    ,                              !- Crankcase Heater Capacity {W}
    ,                              !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C}
    2,                             !- Number of Capacity Stages
    0,                             !- Number of Enhanced Dehumidification Modes
    CoilPerformance:DX:Cooling,    !- Normal Mode Stage 1 Coil Performance Object Type
    Lennox KCA120S4 Stage 1,       !- Normal Mode Stage 1 Coil Performance Name
    CoilPerformance:DX:Cooling,    !- Normal Mode Stage 1+2 Coil Performance Object Type
    Lennox KCA120S4 Stage 1&2;     !- Normal Mode Stage 1+2 Coil Performance Name

Definition

record Lennox_KCA120S4 = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.DoubleSpeed.Generic(sta = {Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.Stage(spe = 1200, nomVal = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.NominalValues(Q_flow_nominal = -17193.23, COP_nominal = 3.54, SHR_nominal = 0.69, m_flow_nominal = 1.2*1.888), perCur = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.PerformanceCurve(capFunT = {0.6383427, 0.0368605, -0.0002156, -0.0032619, -0.0000414, -0.0001587}, capFunFF = {0.6422487, 0.5494037, -0.1916525}, EIRFunT = {0.6609961, -0.0173045, 0.0003871, 0.0121825, 0.0003430, -0.0004676}, EIRFunFF = {1.3016695, -0.4659596, 0.1642901}, TConInMin = 273.15 + 18.33, TConInMax = 273.15 + 35, TEvaInMin = 273.15 + 17.22, TEvaInMax = 273.15 + 21.67, ffMin = 0.8, ffMax = 1.2)), Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.Stage(spe = 1200*35235.87/17193.23, nomVal = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.NominalValues(Q_flow_nominal = -35235.87, COP_nominal = 3.88, SHR_nominal = 0.72, m_flow_nominal = 1.2*1.888), perCur = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.PerformanceCurve(capFunT = {0.6803326, 0.0268925, 0.0001473, 0.0003186, -0.0000584, -0.0002929}, capFunFF = {0.6716542, 0.4945968, -0.1662510}, EIRFunT = {0.7758738, -0.0051500, 0.0002254, -0.0042810, 0.0006657, -0.0006284}, EIRFunFF = {1.2812519, -0.4288495, 0.1475977}, TConInMin = 273.15 + 29.44, TConInMax = 273.15 + 46.11, TEvaInMin = 273.15 + 17.22, TEvaInMax = 273.15 + 21.67, ffMin = 0.8, ffMax = 1.2))});