.Buildings.Fluid.DXSystems.Cooling.AirSource.Data.DoubleSpeed.Lennox_KCA240S4

Information

Performance data for double speed air source cooling coil model. This data corresponds to the following EnergyPlus model:

Coil:Cooling:DX:TwoStageWithHumidityControlMode,
    Lennox KCA240S4,               !- Name
    CoolingCoilAvailSched,         !- Availability Schedule Name
    DXCoilAirInletNode,            !- Air Inlet Node Name
    DXCoilAirOutletNode,           !- Air Outlet Node Name
    ,                              !- Crankcase Heater Capacity {W}
    ,                              !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C}
    2,                             !- Number of Capacity Stages
    0,                             !- Number of Enhanced Dehumidification Modes
    CoilPerformance:DX:Cooling,    !- Normal Mode Stage 1 Coil Performance Object Type
    Lennox KCA240S4 Stage 1,       !- Normal Mode Stage 1 Coil Performance Name
    CoilPerformance:DX:Cooling,    !- Normal Mode Stage 1+2 Coil Performance Object Type
    Lennox KCA240S4 Stage 1&2;     !- Normal Mode Stage 1+2 Coil Performance Name

Definition

record Lennox_KCA240S4 = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.DoubleSpeed.Generic(sta = {Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.Stage(spe = 1200, nomVal = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.NominalValues(Q_flow_nominal = -46951.87, COP_nominal = 3.74, SHR_nominal = 0.75, m_flow_nominal = 1.2*3.776), perCur = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.PerformanceCurve(capFunT = {0.6774110, 0.0279341, 0.0001421, -0.0020862, -0.0000337, -0.0002350}, capFunFF = {0.6631316, 0.4928260, -0.1559576}, EIRFunT = {0.7433676, -0.0189703, 0.0003270, 0.0118669, 0.0003111, -0.0004329}, EIRFunFF = {1.3251503, -0.4910623, 0.1659119}, TConInMin = 273.15 + 18.33, TConInMax = 273.15 + 35, TEvaInMin = 273.15 + 17.22, TEvaInMax = 273.15 + 21.67, ffMin = 0.8, ffMax = 1.2)), Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.Stage(spe = 1200*69944.52/46951.87, nomVal = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.NominalValues(Q_flow_nominal = -69944.52, COP_nominal = 3.83, SHR_nominal = 0.78, m_flow_nominal = 1.2*3.776), perCur = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.PerformanceCurve(capFunT = {0.8015587, 0.0136475, 0.0005406, -0.0001875, -0.0000475, -0.0003036}, capFunFF = {0.6880235, 0.4533082, -0.1413317}, EIRFunT = {0.6483859, 0.0034675, -0.0000671, 0.0026918, 0.0005166, -0.0006149}, EIRFunFF = {1.2930771, -0.4396936, 0.1466166}, TConInMin = 273.15 + 29.44, TConInMax = 273.15 + 46.11, TEvaInMin = 273.15 + 17.22, TEvaInMax = 273.15 + 21.67, ffMin = 0.8, ffMax = 1.2))});