.Buildings.Fluid.DXSystems.Cooling.AirSource.Data.DoubleSpeed.Lennox_SCA120H4B

Information

Performance data for double speed air source cooling coil model. This data corresponds to the following EnergyPlus model:

Coil:Cooling:DX:TwoStageWithHumidityControlMode,
    Lennox SCA120H4B,               !- Name
    CoolingCoilAvailSched,          !- Availability Schedule Name
    DXCoilAirInletNode,             !- Air Inlet Node Name
    DXCoilAirOutletNode,            !- Air Outlet Node Name
    ,                               !- Crankcase Heater Capacity {W}
    ,                               !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C}
    2,                              !- Number of Capacity Stages
    0,                              !- Number of Enhanced Dehumidification Modes
    CoilPerformance:DX:Cooling,     !- Normal Mode Stage 1 Coil Performance Object Type
    Lennox SCA120H4B Stage 1,       !- Normal Mode Stage 1 Coil Performance Name
    CoilPerformance:DX:Cooling,     !- Normal Mode Stage 1+2 Coil Performance Object Type
    Lennox SCA120H4B Stage 1&2;     !- Normal Mode Stage 1+2 Coil Performance Name

Definition

record Lennox_SCA120H4B = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.DoubleSpeed.Generic(sta = {Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.Stage(spe = 1200, nomVal = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.NominalValues(Q_flow_nominal = -18218.38, COP_nominal = 4.09, SHR_nominal = 0.67, m_flow_nominal = 1.2*1.888), perCur = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.PerformanceCurve(capFunT = {0.8197084, 0.0064733, 0.0008546, 0.0002134, -0.0000477, -0.0003191}, capFunFF = {0.7266881, 0.3938907, -0.1205788}, EIRFunT = {0.6505692, -0.0124024, 0.0001183, 0.0144585, 0.0003194, -0.0005187}, EIRFunFF = {1.2512370, -0.3652365, 0.1139994}, TConInMin = 273.15 + 18.33, TConInMax = 273.15 + 35, TEvaInMin = 273.15 + 17.22, TEvaInMax = 273.15 + 21.67, ffMin = 0.8, ffMax = 1.2)), Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.Stage(spe = 1200*36436.76/18218.38, nomVal = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.NominalValues(Q_flow_nominal = -36436.76, COP_nominal = 4.35, SHR_nominal = 0.73, m_flow_nominal = 1.2*1.888), perCur = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.PerformanceCurve(capFunT = {0.9438524, -0.0094097, 0.0013226, 0.0038157, -0.0000608, -0.0004721}, capFunFF = {0.7266881, 0.4139871, -0.1406752}, EIRFunT = {0.5476528, 0.0268762, -0.0007716, -0.0070535, 0.0006878, -0.0005488}, EIRFunFF = {1.2731734, -0.4301446, 0.1569712}, TConInMin = 273.15 + 29.44, TConInMax = 273.15 + 46.11, TEvaInMin = 273.15 + 17.22, TEvaInMax = 273.15 + 21.67, ffMin = 0.8, ffMax = 1.2))});