.Buildings.Fluid.DXSystems.Cooling.AirSource.Data.DoubleSpeed.Lennox_TCA120S

Information

Performance data for double speed air source cooling coil model. This data corresponds to the following EnergyPlus model:

Coil:Cooling:DX:TwoStageWithHumidityControlMode,
    Lennox TCA120S,                !- Name
    CoolingCoilAvailSched,         !- Availability Schedule Name
    DXCoilAirInletNode,            !- Air Inlet Node Name
    DXCoilAirOutletNode,           !- Air Outlet Node Name
    ,                              !- Crankcase Heater Capacity {W}
    ,                              !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C}
    2,                             !- Number of Capacity Stages
    0,                             !- Number of Enhanced Dehumidification Modes
    CoilPerformance:DX:Cooling,    !- Normal Mode Stage 1 Coil Performance Object Type
    Lennox TCA120S Stage 1,        !- Normal Mode Stage 1 Coil Performance Name
    CoilPerformance:DX:Cooling,    !- Normal Mode Stage 1+2 Coil Performance Object Type
    Lennox TCA120S Stage 1&2;      !- Normal Mode Stage 1+2 Coil Performance Name

Definition

record Lennox_TCA120S = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.DoubleSpeed.Generic(sta = {Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.Stage(spe = 1200, nomVal = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.NominalValues(Q_flow_nominal = -18276.96, COP_nominal = 3.54, SHR_nominal = 0.71, m_flow_nominal = 1.2*1.888), perCur = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.PerformanceCurve(capFunT = {0.9945773, -0.0149279, 0.0011358, 0.0023510, -0.0001038, -0.0001298}, capFunFF = {0.7756410, 0.3245192, -0.1001603}, EIRFunT = {0.6121724, 0.0075378, -0.0002892, 0.0056946, 0.0003564, -0.0004210}, EIRFunFF = {1.1786830, -0.2662820, 0.0875989}, TConInMin = 273.15 + 18.33, TConInMax = 273.15 + 35, TEvaInMin = 273.15 + 17.22, TEvaInMax = 273.15 + 21.67, ffMin = 0.8, ffMax = 1.2)), Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.Stage(spe = 1200*37139.72/18276.96, nomVal = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.NominalValues(Q_flow_nominal = -37139.72, COP_nominal = 3.68, SHR_nominal = 0.72, m_flow_nominal = 1.2*1.888), perCur = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.PerformanceCurve(capFunT = {1.0746975, -0.0187470, 0.0013175, -0.0005737, -0.0000298, -0.0002236}, capFunFF = {0.7752366, 0.3233438, -0.0985804}, EIRFunT = {0.4749267, 0.0251138, -0.0006690, 0.0021468, 0.0004483, -0.0004911}, EIRFunFF = {1.2030577, -0.3137318, 0.1106741}, TConInMin = 273.15 + 29.44, TConInMax = 273.15 + 46.11, TEvaInMin = 273.15 + 17.22, TEvaInMax = 273.15 + 21.67, ffMin = 0.8, ffMax = 1.2))});