.Buildings.Fluid.DXSystems.Cooling.AirSource.Data.DoubleSpeed.Lennox_TCA240S

Information

Performance data for double speed air source cooling coil model. This data corresponds to the following EnergyPlus model:

Coil:Cooling:DX:TwoStageWithHumidityControlMode,
    Lennox TCA240S,               !- Name
    CoolingCoilAvailSched,        !- Availability Schedule Name
    DXCoilAirInletNode,           !- Air Inlet Node Name
    DXCoilAirOutletNode,          !- Air Outlet Node Name
    ,                             !- Crankcase Heater Capacity {W}
    ,                             !- Maximum Outdoor Dry-Bulb Temperature for Crankcase Heater Operation {C}
    2,                            !- Number of Capacity Stages
    0,                            !- Number of Enhanced Dehumidification Modes
    CoilPerformance:DX:Cooling,   !- Normal Mode Stage 1 Coil Performance Object Type
    Lennox TCA240S Stage 1,       !- Normal Mode Stage 1 Coil Performance Name
    CoilPerformance:DX:Cooling,   !- Normal Mode Stage 1+2 Coil Performance Object Type
    Lennox TCA240S Stage 1&2;     !- Normal Mode Stage 1+2 Coil Performance Name

Definition

record Lennox_TCA240S = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.DoubleSpeed.Generic(sta = {Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.Stage(spe = 1200, nomVal = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.NominalValues(Q_flow_nominal = -49207.2, COP_nominal = 3.47, SHR_nominal = 0.71, m_flow_nominal = 1.2*3.776), perCur = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.PerformanceCurve(capFunT = {0.9914722, -0.0108810, 0.0010999, -0.0007210, -0.0000305, -0.0001953}, capFunFF = {0.7797619, 0.3244048, -0.1041667}, EIRFunT = {0.5325300, 0.0033859, -0.0001823, 0.0107895, 0.0003050, -0.0004131}, EIRFunFF = {1.1888341, -0.2942931, 0.1054590}, TConInMin = 273.15 + 18.33, TConInMax = 273.15 + 35, TEvaInMin = 273.15 + 17.22, TEvaInMax = 273.15 + 21.67, ffMin = 0.8, ffMax = 1.2)), Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.Stage(spe = 1200*71174.7/49207.2, nomVal = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.NominalValues(Q_flow_nominal = -71174.7, COP_nominal = 3.45, SHR_nominal = 0.77, m_flow_nominal = 1.2*3.776), perCur = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.PerformanceCurve(capFunT = {1.0116786, -0.0156968, 0.0012604, 0.0009509, -0.0000422, -0.0002417}, capFunFF = {0.7860082, 0.3117284, -0.0977366}, EIRFunT = {0.6088217, 0.0104053, -0.0002803, 0.0009889, 0.0004927, -0.0005063}, EIRFunFF = {1.1739773, -0.2636802, 0.0897028}, TConInMin = 273.15 + 29.44, TConInMax = 273.15 + 46.11, TEvaInMin = 273.15 + 17.22, TEvaInMax = 273.15 + 21.67, ffMin = 0.8, ffMax = 1.2))});