.Buildings.Fluid.DXSystems.Cooling.AirSource.Data.SingleSpeed.Carrier_Weathermaster_50HJ012

Information

Performance data for DX single speed air source cooling coil model. This data corresponds to the following EnergyPlus model:

Coil:Cooling:DX:SingleSpeed,
    Carrier Weathermaster 50HJ012,               !- Name
    CoolingCoilAvailSched,                       !- Availability Schedule Name
    36846.82,                                    !- Rated Total Cooling Capacity {W}
    0.73,                                        !- Rated Sensible Heat Ratio
    3.71,                                        !- Rated COP
    1.888,                                       !- Rated Air Flow Rate {m3/s}
    ,                                            !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
    DXCoilAirInletNode,                          !- Air Inlet Node Name
    DXCoilAirOutletNode,                         !- Air Outlet Node Name
    Carrier Weathermaster 50HJ012 CapFT,         !- Total Cooling Capacity Function of Temperature Curve Name
    Carrier Weathermaster 50HJ012 CapFFF,        !- Total Cooling Capacity Function of Flow Fraction Curve Name
    Carrier Weathermaster 50HJ012 EIRFT,         !- Energy Input Ratio Function of Temperature Curve Name
    Carrier Weathermaster 50HJ012 EIRFFF,        !- Energy Input Ratio Function of Flow Fraction Curve Name
    Carrier Weathermaster 50HJ012 PLFFPLR;       !- Part Load Fraction Correlation Curve Name

Definition

record Carrier_Weathermaster_50HJ012 = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.SingleSpeed.Generic(sta = {Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.Stage(spe = 1800, nomVal = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.NominalValues(Q_flow_nominal = -36846.82, COP_nominal = 3.71, SHR_nominal = 0.73, m_flow_nominal = 1.2*1.888), perCur = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.PerformanceCurve(capFunT = {0.5878544, 0.0247382, 0.0001631, -0.0034960, -0.0000889, 0.0001450}, capFunFF = {0.7232943, 0.4292712, -0.1525863}, EIRFunT = {0.6445678, -0.0198276, 0.0010284, 0.0222812, 0.0004996, -0.0015296}, EIRFunFF = {1.2158796, -0.3411366, 0.1251095}, TConInMin = 273.15 + 23.89, TConInMax = 273.15 + 51.67, TEvaInMin = 273.15 + 16.67, TEvaInMax = 273.15 + 22.22, ffMin = 0.75, ffMax = 1.25))});