.Buildings.Fluid.DXSystems.Cooling.AirSource.Data.SingleSpeed.Lennox_SCA060H4B

Information

Performance data for DX single speed air source cooling coil model. This data corresponds to the following EnergyPlus model:

Coil:Cooling:DX:SingleSpeed,
    Lennox SCA060H4B,              !- Name
    CoolingCoilAvailSched,         !- Availability Schedule Name
    18452.7,                       !- Rated Total Cooling Capacity {W}
    0.73,                          !- Rated Sensible Heat Ratio
    4.48,                          !- Rated COP
    0.944,                         !- Rated Air Flow Rate {m3/s}
    ,                              !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
    DXCoilAirInletNode,            !- Air Inlet Node Name
    DXCoilAirOutletNode,           !- Air Outlet Node Name
    Lennox SCA060H4B CapFT,        !- Total Cooling Capacity Function of Temperature Curve Name
    Lennox SCA060H4B CapFFF,       !- Total Cooling Capacity Function of Flow Fraction Curve Name
    Lennox SCA060H4B EIRFT,        !- Energy Input Ratio Function of Temperature Curve Name
    Lennox SCA060H4B EIRFFF,       !- Energy Input Ratio Function of Flow Fraction Curve Name
    Lennox SCA060H4B PLFFPLR;      !- Part Load Fraction Correlation Curve Name

Definition

record Lennox_SCA060H4B = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.SingleSpeed.Generic(sta = {Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.Stage(spe = 1800, nomVal = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.NominalValues(Q_flow_nominal = -18452.7, COP_nominal = 4.48, SHR_nominal = 0.73, m_flow_nominal = 1.2*0.944), perCur = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.PerformanceCurve(capFunT = {1.0671319, -0.0218036, 0.0016875, 0.0054500, -0.0000643, -0.0005786}, capFunFF = {0.8174603, 0.2420635, -0.0595238}, EIRFunT = {0.4618717, 0.0448432, -0.0012979, -0.0158459, 0.0007680, -0.0003382}, EIRFunFF = {0.9342105, 0.0986842, -0.0328947}, TConInMin = 273.15 + 29.44, TConInMax = 273.15 + 46.11, TEvaInMin = 273.15 + 17.22, TEvaInMax = 273.15 + 21.67, ffMin = 0.8, ffMax = 1.2))});