.Buildings.Fluid.DXSystems.Cooling.AirSource.Data.SingleSpeed.Lennox_TCA060S2

Information

Performance data for DX single speed air source cooling coil model. This data corresponds to the following EnergyPlus model:

Coil:Cooling:DX:SingleSpeed,
    Lennox TCA060S2,               !- Name
    CoolingCoilAvailSched,         !- Availability Schedule Name
    18452.7,                       !- Rated Total Cooling Capacity {W}
    0.75,                          !- Rated Sensible Heat Ratio
    4.07,                          !- Rated COP
    0.944,                         !- Rated Air Flow Rate {m3/s}
    ,                              !- Rated Evaporator Fan Power Per Volume Flow Rate {W/(m3/s)}
    DXCoilAirInletNode,            !- Air Inlet Node Name
    DXCoilAirOutletNode,           !- Air Outlet Node Name
    Lennox TCA060S2 CapFT,         !- Total Cooling Capacity Function of Temperature Curve Name
    Lennox TCA060S2 CapFFF,        !- Total Cooling Capacity Function of Flow Fraction Curve Name
    Lennox TCA060S2 EIRFT,         !- Energy Input Ratio Function of Temperature Curve Name
    Lennox TCA060S2 EIRFFF,        !- Energy Input Ratio Function of Flow Fraction Curve Name
    Lennox TCA060S2 PLFFPLR;       !- Part Load Fraction Correlation Curve Name

Definition

record Lennox_TCA060S2 = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.SingleSpeed.Generic(sta = {Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.Stage(spe = 1800, nomVal = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.NominalValues(Q_flow_nominal = -18452.7, COP_nominal = 4.07, SHR_nominal = 0.75, m_flow_nominal = 1.2*0.944), perCur = Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.BaseClasses.PerformanceCurve(capFunT = {0.9274018, -0.0049893, 0.0010446, 0.0003500, -0.0000300, -0.0002957}, capFunFF = {0.7539683, 0.3650794, -0.1190476}, EIRFunT = {0.5480534, 0.0256216, -0.0006559, -0.0031147, 0.0006074, -0.0006367}, EIRFunFF = {1.0120192, -0.0420673, 0.0300481}, TConInMin = 273.15 + 29.44, TConInMax = 273.15 + 46.11, TEvaInMin = 273.15 + 17.22, TEvaInMax = 273.15 + 21.67, ffMin = 0.8, ffMax = 1.2))});