modelBackPressure
Controller for fan that regulates speed to attain zero back pressure
Information
PI-controller to regulate a fan to attain zero back pressure.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Controller | |||
| Real | k | 1 | Gain of PI controller |
| Modelica.Units.SI.Time | Ti | 60 | Integrator time constant of PI controller |
Connectors
| Type | Name | Default | Description |
|---|---|---|---|
| Buildings.Controls.OBC.CDL.Interfaces.RealInput | pMea | Measured pressure at inlet of rear door heat exchanger | |
| Buildings.Controls.OBC.CDL.Interfaces.RealInput | pSet | Set point for inlet air pressure | |
| Controls.OBC.CDL.Interfaces.RealOutput | y | Fan control signal |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Buildings.Controls.OBC.CDL.Reals.PID | con | Fan speed PI controller |
Revisions
-
September 15, 2026, by Michael Wetter:
First implementation.