.Buildings.Fluid.FixedResistances.Validation

Information

This package contains validation models for the classes in Buildings.Fluid.FixedResistances.

Note that most validation models contain simple input data which may not be realistic, but for which the correct output can be obtained through an analytic solution. The examples plot various outputs, which have been verified against these solutions. These model outputs are stored as reference data and used for continuous validation whenever models in the library change.

Contents

Name Description
FlowJunctionSteadyState Test model for the three way splitter/mixer model configured as steady-state
FlowJunctionSteadyStateNoPressureDrop Test model for the three way splitter/mixer model configured as steady-state
LosslessPipe Validation model for lossless pipe
PressureDropsExplicit Test of multiple resistances in series
PressureDropsExplicitLinearized Test of multiple linearized resistances in series
PressureDropsParallel Test with multiple resistances in parallel
PressureDropsSeries Test of multiple resistances in series
PlugFlowPipes

Generated at 2021-04-18T01:03:03Z by OpenModelicaOpenModelica 1.18.0~dev-228-gf450566 using GenerateDoc.mos