.Buildings.Fluid.HeatPumps.ModularReversible.BaseClasses.PartialReversibleRefrigerantMachine

Information

This partial model defines all components which are equally required for heat pump and chillers. This encompasses

• the heat exchangers (evaporator and condenser),
• sensors for temperature and mass flow rates,
• the replaceable model for refrigerant inertia,
• safety controls,
• connectors and parameters,
• and the replaceable refrigerant cycle model refCyc

The model refCyc is replaced in the ModularReversible model for heat pumps and chillers, e.g. by Buildings.Fluid.HeatPumps.ModularReversible.BaseClasses.RefrigerantCycle in Buildings.Fluid.HeatPumps.ModularReversible.Modular.

For more information on the approach, please read the UsersGuide.

Contents

Name	Description
MediumCon	Medium on condenser side
MediumEva	Medium on evaporator side
RefrigerantCycleInertia	Inertia between the refrigerant cycle outputs and the heat exchangers.

Revisions

• February 27, 2025 by Jianjun Hu:
  Corrected conditions for removing COP and EER output connector.
  This is for IBPSA #1979.
• February 25, 2025 by Antoine Gautier:
  Removed hysteresis.
  This is for IBPSA #1977.
• August 19, 2024 by Michael Wetter:
  Changed markup commands for code merge.
  This is for IBPSA #1919.
• July 15, 2024 by Fabian Wuellhorst:
  Adjust hysteresis bandwidth (see issue IBPSA #1908)
• May 2, 2024, by Michael Wetter:
  Refactored check for device identifiers.
  This is for IBPSA, #1576.
• October 2, 2022 by Fabian Wuellhorst:
  Adjusted based on the discussion in this issue #1576)
• May 22, 2019 by Julian Matthes:
  Rebuild due to the introducion of the thermal machine partial model (see issue #715)
• November 26, 2018 by Fabian Wuellhorst:
  First implementation (see issue #577)