.Buildings.Fluid.HeatPumps.Validation

Information

This package contains models that validate the heat pump models. The examples plot various outputs, which have been verified against analytical solutions. These model outputs are stored as reference data to allow continuous validation whenever models in the library change.

Contents

Name	Description
Carnot_TCon_LimitedCapacity	Test model for Carnot_TCon with limited heating capacity
Carnot_TCon_LowTemperature	Test model for Carnot_TCon with low condenser leaving water temperature
Carnot_TCon_etaPL	Test model for the part load efficiency curve with condenser leaving temperature as input signal
Carnot_TCon_reverseFlow	Test model for heat pump based on Carnot efficiency and condenser outlet temperature control signal
Carnot_y_etaCar	Test model for heat pump based on Carnot efficiency with etaCar as parameter
Carnot_y_etaPL	Test model for the part load efficiency curve with compressor speed as input signal
EquationFitReversible_EnergyPlus	Validation with EnergyPlus model
EquationFitReversible_ScalingFactor	Test model for scaling up the reversable heat pump
ReciprocatingWaterToWater_Dynamic	Test model for variable speed reciprocating water to water heat pump
ReciprocatingWaterToWater_ScalingFactor	Test model for variable speed reciprocating water to water heat pump
ReciprocatingWaterToWater_Static	Test model for static, reciprocating water to water heat pump
ReciprocatingWaterToWater_VariableSpeed	Test model for reciprocating water to water heat pump
ScrollWaterToWater_Dynamic	Test model for scroll water to water heat pump
ScrollWaterToWater_ScalingFactor	Test model for scroll water to water heat pump
ScrollWaterToWater_Static	Test model for static scroll water to water heat pump
ScrollWaterToWater_TemperatureProtection	Test model for temperature protection of scroll water to water heat pump
ScrollWaterToWater_VariableSpeed	Test model for scroll water to water heat pump