.Buildings.Utilities.Psychrometrics.Functions

Information

This package contains functions for psychrometric calculations.

The nomenclature used in this package is described at Buildings.UsersGuide.Conventions.

Contents

NameDescription
TDewPoi_pWFunction to compute the water vapor partial pressure for a given dew point temperature of moist air
TDewPoi_pW_ambFunction to compute the dew point temperature of moist air for a given water vapor partial pressure
X_pSatpphiHumidity ratio for given water vapor pressure
X_pTphiAbsolute humidity for given pressure, dry bulb temperature and relative humidity
X_pWMass fraction for given water vapor pressure
density_pTXDensity of air as a function of pressure, temperature and species concentration
pW_TDewPoiFunction to compute the water vapor partial pressure for a given dew point temperature of moist air
pW_TDewPoi_ambFunction to compute the water vapor partial pressure for a given dew point temperature of moist air
pW_XWater vapor pressure for given humidity ratio
phi_pTXRelative humidity for given pressure, dry bulb temperature and moisture mass fraction
saturationPressureSaturation curve valid for 223.16 <= T <= 373.16 (and slightly outside with less accuracy)
saturationPressureLiquidReturn saturation pressure of water as a function of temperature T in the range of 273.16 to 373.16 K
sublimationPressureIceReturn sublimation pressure of water as a function of temperature T between 190 and 273.16 K
ExamplesCollection of models that illustrate model use and test models
BaseClassesPackage with base classes for Buildings.Utilities.Psychrometrics.Functions

Generated at 2024-03-28T19:15:55Z by OpenModelicaOpenModelica 1.22.3 using GenerateDoc.mos