modelEnable_TOut_hOut

Model validates economizer disable in case outdoor air conditions are above cutoff
Diagram of Enable_TOut_hOutOpen the diagram
▶ Simulate in your browser

Information

This example validates Buildings.Controls.OBC.ASHRAE.G36.AHUs.SingleZone.VAV.Economizers.Subsequences.Enable for the following control signals: TOut, TOutCut, hOut, hOutCut.

Components

TypeNameDefaultDescription
Buildings.Controls.OBC.ASHRAE.G36.AHUs.SingleZone.VAV.Economizers.Subsequences.EnableenaDisSingle zone VAV AHU economizer enable disable sequence
Buildings.Controls.OBC.ASHRAE.G36.AHUs.SingleZone.VAV.Economizers.Subsequences.EnableenaDis1Single zone VAV AHU economizer enable disable sequence
Buildings.Controls.OBC.ASHRAE.G36.AHUs.SingleZone.VAV.Economizers.Subsequences.EnableenaDis2Single zone VAV AHU economizer enable disable sequence
Buildings.Controls.OBC.CDL.Reals.Sources.ConstantTOutCutOutdoor air temperature cutoff
Buildings.Controls.OBC.CDL.Reals.Sources.ConstanthOutCut1Outdoor air enthalpy cutoff
Buildings.Controls.OBC.CDL.Reals.Sources.SinTOutOutdoor air temperature
Buildings.Controls.OBC.CDL.Reals.Sources.SinhOutOutdoor air enthalpy

Revisions

  • July 30, 2019, by Kun Zhang:
    Added validation for fixed plus differential dry bulb temperature cutoff.
  • June 13, 2017, by Milica Grahovac:
    First implementation.