modelWithoutDHW
ETS connected to building loads without DHW
Extends from Modelica.Icons.Example (Icon for runnable examples).
Information
Validation model for a single building load, modeled as time series, connected to an ETS.
Note the following:
- The model does not contain a district loop. Rather, the service line is connected to a constant pressure boundary, and the example model contains an energy transfer station connected to a building load.
-
The information that no domestic hot water integration should be modeled
is obtained from the load profile
filNamby reading its entry for the peak domestic hot water load. As it is zero, the parameterbui.have_hotWatis set tofalse.
This model is identical to Buildings.DHC.Examples.Combined.ETSHeatRecoveryHeatPump_BuildingTimeSeries.WithDHW, except that it has no domestic hot water.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| String | filNam | "modelica://Buildings/Resources/Data/DHC/Loads/Examples/JBA_ClusterA_futu_tendays.mos" | Load profile |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Buildings.BoundaryConditions.WeatherData.ReaderTMY3 | wea | Weather data reader | |
| Buildings.Fluid.Sources.Boundary_pT | ambWat | Ambient water supply and return | |
| Buildings.DHC.Examples.Combined.ETSHeatRecoveryHeatPump_BuildingTimeSeries.BaseClasses.BuildingETS | bui | Building time series with energy transfer station | |
| Modelica.Blocks.Continuous.Integrator | dHHeaWat | Cumulative enthalpy difference of heating hot water | |
| Modelica.Blocks.Continuous.Integrator | dHChiWat | Cumulative enthalpy difference of chilled water | |
| Buildings.DHC.Networks.BaseClasses.DifferenceEnthalpyFlowRate | senHFlo | Variation of enthalpy flow rate | |
| Modelica.Blocks.Continuous.Integrator | dHFlo | Cumulative enthalpy difference across the ets hex | |
| Modelica.Blocks.Continuous.Integrator | EChi | Cumulative electricity consumption of the heat recovery chiller |
Contents
| Name | Description |
|---|---|
 Medium | Medium model |