modelApparatusDewPoint
Test model for ApparatusDewPoint
Extends from Modelica.Icons.Example (Icon for runnable examples).
Information
This example illustrates calculation of air properties at apparatus dew point: Buildings.Fluid.DXSystems.Cooling.BaseClasses.ApparatusDewPoint.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Integer | nSta | 4 | Number of standard compressor speeds |
| Real | minSpeRat | 0.2 | Minimum speed ratio |
| Real | speRatDeaBan | 0.05 | Deadband for minimum speed ratio |
| Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.DXCoil | datCoi | Coil data |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Modelica.Blocks.Sources.Constant | p | Pressure | |
| Buildings.Fluid.DXSystems.Cooling.BaseClasses.ApparatusDewPoint | adp | Calculates air properties at apparatus dew point condition | |
| Modelica.Blocks.Sources.Ramp | m_flow | Mass flow rate of air | |
| Modelica.Blocks.Sources.Ramp | XEvaIn | Inlet air mass fraction | |
| Modelica.Blocks.Sources.Ramp | Q_flow | Cooling rate | |
| Modelica.Blocks.Sources.TimeTable | speRat | Speed ratio | |
| Modelica.Blocks.Sources.Constant | hEvaIn | Air enthalpy at inlet |
Contents
| Name | Description |
|---|---|
 Medium |
Revisions
-
April 5, 2023, by Xing Lu and Karthik Devaprasad:
Updated data record class fordatCoifromDXCoilto Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.DXCoil.
-
April 10, 2012 by Kaustubh Phalak:
First implementation.