OMC

modelWetCoil

Test model for WetCoil

Diagram of WetCoil

▶ Simulate in your browser

Extends from Modelica.Icons.Example (Icon for runnable examples).

Information

This example illustrates working of WetCoil block Buildings.Fluid.DXSystems.Cooling.BaseClasses.WetCoil.

Parameters

Type	Name	Default	Description
Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.DXCoil	datCoi		Coil data

Components

Type	Name	Default	Description
Modelica.Blocks.Sources.Constant	p		Pressure
Buildings.Fluid.DXSystems.Cooling.BaseClasses.WetCoil	wetCoi		Performs calculation for wet coil condition
Modelica.Blocks.Sources.Constant	TConIn		Condenser inlet air temperature
Modelica.Blocks.Sources.IntegerStep	onOff		Compressor on-off signal
Modelica.Blocks.Sources.Ramp	m_flow		Mass flow rate of air
Modelica.Blocks.Sources.Ramp	XEvaIn		Inlet mass-fraction
Modelica.Blocks.Sources.Ramp	hEvaIn		Specific enthalpy of air entering the coil
Modelica.Blocks.Sources.Ramp	TEvaIn		Inlet air temperature
Modelica.Blocks.Sources.TimeTable	speRat		Speed ratio

Contents

Name	Description
Medium

Revisions

Changed redeclare in wetCoi from instance cooCap with class CoolingCapacityAirCooled to instance coiCap with class Buildings.Fluid.DXSystems.BaseClasses.CapacityAirSource.
Changed class for data record datCoi from DXCoil to Buildings.Fluid.DXSystems.Cooling.AirSource.Data.Generic.DXCoil.
January 11, 2021, by Michael Wetter:
Corrected datCoi to be a parameter.
April 10, 2012 by Kaustubh Phalak:
First implementation.