modelInletToAirDryAirCO2

Validation model for inlet to air with dry air medium and CO2

Extends from Buildings.Fluid.FMI.Conversion.Validation.InletToAirMoistAirCO2 (Validation model for inlet to Buildings.Media.Air conversion with C02 trace substances).

Information

This validation test is identical to Buildings.Fluid.FMI.Conversion.Validation.InletToAirMoistAirCO2 except that it uses a medium model without moisture. Hence, it tests whether the water vapor connectors are correctly removed.

Type	Name	Default	Description
Boolean	use_p_in (from InletToAirMoistAir)	false	= true to use a pressure from connector, false to output Medium.p_default

Type	Name	Description
Modelica.Blocks.Sources.Constant	m_flow (from InletToAirMoistAir)	Mass flow rate
Modelica.Blocks.Sources.Constant	T (from InletToAirMoistAir)	Room temperature
Buildings.Fluid.FMI.Conversion.InletToAir	conAir (from InletToAirMoistAir)	Converter for air
Source_T	sou (from InletToAirMoistAir)	Source for mass flow rate and pressure
Modelica.Blocks.Sources.Constant	pIn (from InletToAirMoistAir)	Inlet pressure
Modelica.Blocks.Sources.Constant	X_w_in (from InletToAirMoistAir)	Inlet mass fraction
Modelica.Blocks.Sources.Constant[Medium.nC]	C (from InletToAirMoistAir)	Trace substances for forward flow
Buildings.Fluid.FMI.Conversion.InletToAir	conAirRevFlo (from InletToAirMoistAir)	Converter for air with reverse flow
Source_T	souRev (from InletToAirMoistAir)	Source for mass flow rate and pressure with reverse flow
Modelica.Blocks.Sources.Constant	TRev (from InletToAirMoistAir)	Temperature for reverse flow
Modelica.Blocks.Sources.Constant	X_w (from InletToAirMoistAir)	Mass flow fraction for reverse flow
Modelica.Blocks.Sources.Constant[Medium.nC]	CRev (from InletToAirMoistAirCO2)	Trace substance for reverse flow