modelComparePowerInput

Compare power estimation with different input signal

Extends from Modelica.Icons.Example (Icon for runnable examples), Buildings.Fluid.Movers.Validation.BaseClasses.ComparePower (Base class for validation models that compare power estimation methods).

Information

This validation model is similar to Buildings.Fluid.Movers.Validation.ComparePowerHydraulic. It demonstrates that the mover models with different input signals should produce the same power computation results.

Type	Name	Default	Description
Buildings.Fluid.Movers.Data.Generic	per (from ComparePower)
Modelica.Units.SI.MassFlowRate	m_flow_nominal (from ComparePower)	per.peak.V_flow*rho_default	Nominal mass flow rate
Modelica.Units.SI.PressureDifference	dp_nominal (from ComparePower)	per.peak.dp	Nominal pressure drop
Modelica.Units.SI.Density	rho_default (from ComparePower)	Medium.density_pTX(p = Medium.p_default, T = Medium.T_default, X = Medium.X_default)	Default medium density

Type	Name	Description
Buildings.Fluid.Movers.BaseClasses.PartialFlowMachine	mov1 (from ComparePower)
Buildings.Fluid.Movers.BaseClasses.PartialFlowMachine	mov2 (from ComparePower)
Buildings.Fluid.Movers.BaseClasses.PartialFlowMachine	mov3 (from ComparePower)
Buildings.Fluid.Actuators.Dampers.Exponential	damExp1 (from ComparePower)	Damper
Buildings.Fluid.Actuators.Dampers.Exponential	damExp2 (from ComparePower)	Damper
Buildings.Fluid.Actuators.Dampers.Exponential	damExp3 (from ComparePower)	Damper
Buildings.Fluid.Sources.Boundary_pT	sou (from ComparePower)	Source
Buildings.Fluid.Sources.Boundary_pT	sin (from ComparePower)	Sink
Modelica.Blocks.Sources.Ramp	ramSpe (from ComparePower)	Ramp signal for mover speed
Modelica.Blocks.Sources.Ramp	ramDam (from ComparePower)	Ramp signal for damper position
Modelica.Blocks.Sources.RealExpression	exp_dp	Expression to impose the same pressure rise
Modelica.Blocks.Sources.RealExpression	exp_m_flow	Expression to impose the same mass flow rate