modelComparePowerTotal

Compare power estimation with total power curve

Extends from Buildings.Fluid.Movers.Validation.ComparePowerHydraulic (Compare power estimation with hydraulic power curve).

Information

This validation model is similar to Buildings.Fluid.Movers.Validation.ComparePowerHydraulic, with the difference being the fan components are replaced with pump components with per.powerOrEfficiencyIsHydraulic=false.

Type	Name	Default	Description
Buildings.Fluid.Movers.Data.Generic	per (from ComparePower)
Modelica.Units.SI.MassFlowRate	m_flow_nominal (from ComparePower)	per.peak.V_flow*rho_default	Nominal mass flow rate
Modelica.Units.SI.PressureDifference	dp_nominal (from ComparePower)	per.peak.dp	Nominal pressure drop
Modelica.Units.SI.Density	rho_default (from ComparePower)	Medium.density_pTX(p = Medium.p_default, T = Medium.T_default, X = Medium.X_default)	Default medium density
Buildings.Fluid.Movers.BaseClasses.Euler.peak	peak (from ComparePowerHydraulic)	Buildings.Fluid.Movers.BaseClasses.Euler.getPeak(pressure = per.pressure, power = per.power)	Peak operating point

Type	Name	Description
Buildings.Fluid.Movers.BaseClasses.PartialFlowMachine	mov1 (from ComparePower)
Buildings.Fluid.Movers.BaseClasses.PartialFlowMachine	mov2 (from ComparePower)
Buildings.Fluid.Movers.BaseClasses.PartialFlowMachine	mov3 (from ComparePower)
Buildings.Fluid.Actuators.Dampers.Exponential	damExp1 (from ComparePower)	Damper
Buildings.Fluid.Actuators.Dampers.Exponential	damExp2 (from ComparePower)	Damper
Buildings.Fluid.Actuators.Dampers.Exponential	damExp3 (from ComparePower)	Damper
Buildings.Fluid.Sources.Boundary_pT	sou (from ComparePower)	Source
Buildings.Fluid.Sources.Boundary_pT	sin (from ComparePower)	Sink
Modelica.Blocks.Sources.Ramp	ramSpe (from ComparePower)	Ramp signal for mover speed
Modelica.Blocks.Sources.Ramp	ramDam (from ComparePower)	Ramp signal for damper position