modelOnlyPartition
Test model for room model
Extends from Modelica.Icons.Example (Icon for runnable examples), BaseClasses.PartialTestModel (Partial model that is used to build the test cases).
Information
This model tests Buildings.ThermalZones.Detailed.MixedAir for the case of having only one partition construction.
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Integer | nConExt (from PartialTestModel) | Number of exterior constructions that do not have a window | |
| Integer | nConExtWin (from PartialTestModel) | Number of exterior constructions that do have a window | |
| Integer | nConPar (from PartialTestModel) | Number of partition constructions | |
| Integer | nConBou (from PartialTestModel) | Number of surface that are connected to constructions that are modeled inside the room | |
| Integer | nSurBou (from PartialTestModel) | Number of surface that are connected to the room air volume | |
| HeatTransfer.Data.OpaqueConstructions.Insulation100Concrete200 | matLayExt (from PartialTestModel) | Construction material for exterior walls | |
| HeatTransfer.Data.OpaqueConstructions.Brick120 | matLayPar (from PartialTestModel) | Construction material for partition walls | |
| HeatTransfer.Data.GlazingSystems.DoubleClearAir13Clear | glaSys (from PartialTestModel) | Data record for the glazing system |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| MixedAir | roo (from PartialTestModel) | Room model | |
| Modelica.Blocks.Sources.Constant | qConGai_flow (from PartialTestModel) | Convective heat gain | |
| Modelica.Blocks.Sources.Constant | qRadGai_flow (from PartialTestModel) | Radiative heat gain | |
| Modelica.Blocks.Routing.Multiplex3 | multiplex3_1 (from PartialTestModel) | ||
| Modelica.Blocks.Sources.Constant | qLatGai_flow (from PartialTestModel) | Latent heat gain | |
| BoundaryConditions.WeatherData.ReaderTMY3 | weaDat (from PartialTestModel) |