recordIComGas_L3
Extends from IComBase_L3.
Information
For detailed model documentation please consult the html-documentation shipped with ClaRa.
Authorship and Copyright Statement for original (initial) Contribution
Author:
DYNCAP/DYNSTART development team, Copyright © 2011-2024.References:
For references please consult the html-documentation shipped with ClaRa.
Remarks:
This component was developed by ClaRa development team under the 3-clause BSD License.
Acknowledgements:ClaRa originated from the collaborative research projects DYNCAP and DYNSTART. Both research projects were supported by the German Federal Ministry for Economic Affairs and Energy (FKZ 03ET2009 and FKZ 03ET7060).
CLA:
The author(s) have agreed to ClaRa CLA, version 1.0. See https://claralib.com/pdf/CLA.pdf
By agreeing to ClaRa CLA, version 1.0 the author has granted the ClaRa development team a permanent right to use and modify his initial contribution as well as to publish it or its modified versions under the 3-clause BSD License.
The ClaRa development team consists of the following partners:
TLK-Thermo GmbH (Braunschweig, Germany)
XRG Simulation GmbH (Hamburg, Germany).
Parameters
| Type | Name | Default | Description |
|---|---|---|---|
| Integer | N_cv (from IComBase_L3) | 2 | Number of zones |
| Integer | N_inlet (from IComBase_L3) | 1 | Number of inlet ports |
| Integer | N_outlet (from IComBase_L3) | 1 | Number of outlet ports |
| Nominal | |||
| Units.Pressure | p_nom (from IComBase_L3) | 1e5 | Nominal pressure |
| Units.PressureDifference | Delta_p_nom (from IComBase_L3) | 1e4 | Nominal pressure |
| Units.MassFlowRate | m_flow_nom (from IComBase_L3) | 1 | Nominal mass flow |
| Units.EnthalpyMassSpecific | h_nom (from IComBase_L3) | 1e4 | Nominal enthalpy |
| Units.MassFraction[:] | xi_nom (from IComBase_L3) | {1} | Nominal mass fraction |
| General | |||
| TILMedia.Gas.Types.BaseGas | mediumModel | Used medium model | |
Components
| Type | Name | Default | Description |
|---|---|---|---|
| Units.Pressure[N_inlet] | p_in (from IComBase_L3) | |Inlet||Inlet pressure | |
| Units.Temperature[N_inlet] | T_in (from IComBase_L3) | |Inlet||Inlet Temperature | |
| Units.MassFlowRate[N_inlet] | m_flow_in (from IComBase_L3) | |Inlet||Inlet mass flow | |
| Units.Pressure[N_outlet] | p_out (from IComBase_L3) | |Outlet||Outlet pressure | |
| Units.Temperature[N_outlet] | T_out (from IComBase_L3) | |Outlet||Outlet Temperature | |
| Units.MassFlowRate[N_outlet] | m_flow_out (from IComBase_L3) | |Outlet||Outlet mass flow | |
| Units.Temperature[N_cv] | T (from IComBase_L3) | |System||Bulk Temperature | |
| Units.Pressure[N_cv] | p (from IComBase_L3) | |System||Outlet pressure | |
| ClaRa.Basics.Units.Volume[N_cv] | volume (from IComBase_L3) | |System||Volume of liquid and vapour zone | |
| TILMedia.Internals.TILMediaExternalObject[N_inlet] | fluidPointer_in | |Inlet||Fluid pointer of inlet ports | |
| TILMedia.Internals.TILMediaExternalObject[N_outlet] | fluidPointer_out | |Outlet||Fluid pointer of outlet ports | |
| ClaRa.Basics.Units.EnthalpyMassSpecific[N_cv] | h | |System||Specific enthalpy of liquid and vapour zone | |
| Units.MassFraction[N_cv,mediumModel.nc - 1] | xi | Medium composition | |
| TILMedia.Internals.TILMediaExternalObject[N_cv] | fluidPointer | |Outlet||Fluid pointer of outlet ports | |
| Units.EnthalpyMassSpecific[N_inlet] | h_in | |Inlet||Fluid pointer of inlet ports | |
| Units.EnthalpyMassSpecific[N_outlet] | h_out | |Outlet||Fluid pointer of outlet ports | |
| Units.MassFraction[N_inlet,mediumModel.nc - 1] | xi_in | |Inlet||Inlet medium composition | |
| Units.MassFraction[N_outlet,mediumModel.nc - 1] | xi_out | |Outlet||Outlet medium composition |
Revisions
For revisions please consult the html-documentation shipped with ClaRa.